Table of contents(13)+
- 01The 30-second test
- 02Method 1: Pair your Philips Roku TV remote
- 03Method 2: Fix a Philips Roku remote that stopped working
- 04Method 3: Use your phone as the remote (free)
- 05Method 4: Replace a lost or broken Philips Roku TV remote
- 06Frequently Asked Questions
- 07How do I pair a Philips Roku TV remote?
- 08Why is my Philips Roku TV remote not working?
- 09Can I use my phone as a Philips Roku TV remote?
- 10How do I reset a Philips Roku TV remote?
- 11Where can I buy a replacement Philips Roku TV remote?
- 12Does a Philips Roku TV remote need Wi-Fi?
- 13Related guides
A Philips Roku TV remote comes in two types: a simple infrared remote that points at the TV, and an enhanced voice remote that pairs wirelessly. Pair the voice type by holding the button inside its battery compartment for about 5 seconds. No remote at all? The free Roku mobile app runs the TV over Wi-Fi.
I set up a Philips 5704-series Roku TV for my parents, and it shipped with the plain IR remote — no mic, no pairing button. My own Philips came with the enhanced voice remote, which is the one that acts up more often. Knowing which remote you're holding changes every fix below, so figure that out first.
The 30-second test
Before you re-pair anything, rule out the cheap fixes. Run this quick check:
- Press any button and watch the top of the remote. A quick LED flash means the batteries still have life.
- Point straight at the TV from about 5 feet. If a simple remote only works up close, swap the batteries.
- Open the Roku app on your phone. If the app controls the TV fine, your remote is the problem — not the set.
No remote in hand right now? The free Roku app controls your Philips Roku TV over Wi-Fi in about a minute. Also own a Hisense TV? The HiRemote app and our online Roku remote (no app) run that one from the same phone.
Method 1: Pair your Philips Roku TV remote
The steps depend on your remote type. The table below sorts out which one you have.
| Feature | Simple IR remote | Enhanced voice remote |
|---|---|---|
| Pairing needed | No | Yes (auto or button) |
| Must point at the TV | Yes | No — works from anywhere |
| Pairing button | None | Inside the battery compartment |
| Microphone / voice | No | Yes |
| TV power & volume buttons | Sometimes | Yes |
Simple IR remote: there's nothing to pair. Drop in fresh AAA batteries and point it at the TV. If it still does nothing, weak batteries or a blocked IR window are usually to blame.
Enhanced voice remote: follow these steps.
- Put in fresh batteries. The remote usually pairs on its own when the TV powers up.
- If it doesn't, open the battery door and find the pairing button.
- Hold it for 3–5 seconds until the LED flashes.
- Wait about 30 seconds. A pairing message appears on the TV.
- Still nothing? Unplug the TV for 10 seconds, plug it back in, and try again.
When it won't pair, the cause is almost always dead batteries or a TV that needs a full restart. For the button-by-button version, see how to pair a Roku remote, or Roku's own remote support pages.
Method 2: Fix a Philips Roku remote that stopped working
Work these in order, fastest first. Most dead remotes come back at step one or two.
- Swap the batteries. Weak batteries fail a wireless remote before an IR one, so don't trust the "they're fine" guess.
- Restart the TV. Unplug it for 10 seconds. This clears most pairing glitches.
- Re-pair the remote using the pairing button (see Method 1).
- Move interference away. A USB 3.0 drive or a router sitting against the TV can jam a wireless Roku remote. Move them a foot or two.
- Update the TV. Using the app or a working remote, go Settings > System > System update > Check now.
Honest catch: a simple IR remote can't be "re-paired" — it has no pairing button. If new batteries and a clear line of sight don't fix it, that remote is likely done. Our full Roku remote not working guide covers the rarer causes.
While you wait on new batteries, don't sit in silence. The Roku browser remote or the Roku app keeps you watching now. On a Hisense set, HiRemote does the same job from your phone — no AAA run required.
Method 3: Use your phone as the remote (free)
Any Philips Roku TV can be controlled by the official Roku app. It's free and works over your home Wi-Fi.
- Install the Roku app from the App Store or Google Play.
- Put your phone on the same Wi-Fi network as the TV.
- Open the app, tap Devices, and pick your Philips Roku TV.
- Tap Remote. You get a D-pad, voice, and a keyboard for fast typing.
If the app can't find the TV, check the TV setting at Settings > System > Advanced system settings > Control by mobile apps, and set Network access to Default. The download-the-Roku-remote guide has screenshots.
Where does our app fit? HiRemote is built for Hisense Roku and VIDAA TVs, not Philips. If your Philips is your only TV, the Roku app is your phone remote. If you also own a Hisense, install HiRemote or open our Hisense Roku TV browser remote and control that set from the same phone — no extra hardware.
Method 4: Replace a lost or broken Philips Roku TV remote
You have three real options, cheapest first.
- Use the Roku app for now. It's free and does everything the physical remote does, minus the feel of buttons.
- Buy a Roku Voice Remote. Roku's own replacement pairs with any Roku TV, including Philips. A generic Roku TV replacement remote from Amazon also works.
- Program a universal remote. Most support Roku TV codes, though you lose the Roku shortcut buttons.
For Philips-branded parts, check Philips support. Our Roku remote replacement guide compares prices and free routes in more detail.
Frequently Asked Questions
How do I pair a Philips Roku TV remote?
Hold the pairing button inside the battery compartment for 3–5 seconds until the LED flashes, then wait about 30 seconds for the TV to show a pairing message. This only applies to the enhanced voice remote. A simple infrared remote needs no pairing — just add batteries and point it at the TV.
Why is my Philips Roku TV remote not working?
Weak batteries are the top cause, so swap them first. Next, unplug the TV for 10 seconds to clear pairing glitches, then re-pair a voice remote with its pairing button. A USB 3.0 drive near the TV can also jam the wireless signal. A simple IR remote just needs batteries and a clear line of sight.
Can I use my phone as a Philips Roku TV remote?
Yes. Install the free Roku app, connect your phone to the same Wi-Fi as the TV, tap Devices, pick your Philips Roku TV, then tap Remote. You get a D-pad, voice search, and a keyboard. If the app won't connect, set Control by mobile apps to Default in the TV's system settings.
How do I reset a Philips Roku TV remote?
Remove the batteries, unplug the TV for about 10 seconds, then plug the TV back in. Once it finishes loading, put the batteries back and hold the pairing button until the LED flashes. This resets and re-pairs an enhanced remote. A simple IR remote has nothing to reset.
Where can I buy a replacement Philips Roku TV remote?
Buy a Roku Voice Remote directly from Roku, or a generic Roku TV replacement remote from Amazon — both pair with Philips Roku TVs. For Philips-branded remotes, check Philips support. Until it arrives, the free Roku app does the same job over Wi-Fi.
Does a Philips Roku TV remote need Wi-Fi?
No. The physical remote uses infrared or a direct wireless link, not your home Wi-Fi, so it works even if the internet is down. Wi-Fi only matters when you control the TV from the Roku phone app, which talks to the TV across your network.
