There's no single universal remote code for a Hisense TV — it depends on your remote's brand. On GE remotes, Hisense code 0671 works across every version (CL3–CL6), with 2081, 2211, 4391, and 5331 as alternates. One For All remotes use 5-digit codes tied to the specific model (for example, the URC 7935 Streamer Remote uses 43155). Cable-box remotes — Comcast/Xfinity, Spectrum, Cox — use their own 5-digit codes; try the codes listed for your brand first.
Table of contents(16)+
- 01Where these codes come from
- 023-digit vs 4-digit vs 5-digit codes
- 03Why IR codes never work on a Hisense Roku TV
- 04What to do when you've tried every code
- 05How to tell if the remote is actually dead
- 06How Hisense series differ (2018-2026)
- 07Cheaper alternative: use your phone
- 08FAQ
- 09What is the 4-digit code for a Hisense TV?
- 10What is the 5-digit code for a Hisense TV?
- 11What is the One For All code for a Hisense TV?
- 12Can a Roku universal remote control a Hisense Roku TV?
- 13Why won't any universal remote code work on my Hisense?
- 14Is there a free alternative to a universal remote for Hisense?
- 15Will a Hisense remote work on a Hisense TV from a different year?
- 16Related guides
There's no single universal remote code for a Hisense TV — the right one depends on which remote brand you have, because Hisense has used more than one infrared protocol since 2018. On a GE remote, the Hisense code 0671 works across every current version (CL3–CL6), with 2081, 2211, 4391, and 5331 as alternates. GE and RCA use 4-digit codes; cable-box remotes (Comcast/Xfinity, Spectrum, Cox) use 5-digit ones; and One For All uses 5-digit setup codes tied to the specific remote model (see the FAQ below). Pick your remote in the tracker above and it steps you through the codes to try, one at a time.
Where these codes come from
Universal remotes don't talk to your TV directly — each one ships with a built-in lookup table that maps a short code to a brand's infrared command set. Hisense shows up under several codes because it has used more than one IR protocol across its lineups (VIDAA, Android TV, Roku and Google TV sets), and every remote maker — GE, RCA, Philips, Comcast and the rest — numbers those protocols differently. That's why one brand's Hisense code won't match another's, and why you usually have to try a few before one sticks. Pick your remote in the tracker above and it steps you through them in order, one at a time, so you never lose track of what you've already ruled out.
| Symptom | Probable cause | Solution |
|---|---|---|
| No code works at all | It's a Hisense Roku TV — it pairs over Bluetooth and ignores IR codes | Use a Roku-branded remote or the Wi-Fi phone app; no code will ever program it |
| A code "confirms" but the buttons do nothing | Weak IR LED — reaches two or three feet but not across the room | Fit fresh batteries in the universal remote |
| None of your brand's codes stick | Remote hasn't tried its whole library, or it's the wrong brand | Run the remote's auto-search, or try the next brand's codes in the tracker |
| Even the original Hisense remote stays dead after a power-cycle | The problem is the TV, not the code | Unplug the TV for 30 seconds; if it's still dead, the fault is the TV |
| Phone camera shows no flash when you press a button | The remote itself is dead | Try fresh batteries, then replace the remote |
| Camera shows a flash but the TV doesn't respond | The TV's IR receiver is blocked, dirty, or failing | Wipe the receiver clean and clear anything sitting in front of it |
3-digit vs 4-digit vs 5-digit codes
The digit count isn't a quality rating — it's just how a particular remote's code table is numbered. Three-digit codes come from older or region-specific universal remotes. Most mainstream US universals — like GE and RCA — use four digits. Cable and satellite box remotes — Comcast/Xfinity, Cox, Spectrum — use five, as do One For All's model-specific setup codes. A longer code isn't "more compatible." Enter the length your remote asks for, and if it offers both a 4- and a 5-digit mode, try the 4-digit set first.
Why IR codes never work on a Hisense Roku TV
If you own a Hisense Roku model (the R-series, and many Roku-badged H-series sets), no universal-remote code will ever program it. Roku TVs pair their remotes over Bluetooth, not infrared, so they simply ignore the IR signals a coded universal remote sends. This is the single most common reason "none of the codes work." The fix isn't a different code — it's a Roku-branded remote that pairs over the network, or the free phone remote app that controls the TV over Wi-Fi. You can spot a Roku Hisense by the purple Roku logo on the original remote and the Roku home screen.
What to do when you've tried every code
If you've stepped through every code for your remote brand in the tracker and none stuck, work through these in order:
- Confirm it isn't a Roku model. Roku Hisense TVs accept no IR codes at all — that's the likeliest answer when nothing works.
- Fit fresh batteries in the universal remote. A weak IR LED often reaches two or three feet but not across the room, so a code "confirms" yet the buttons do nothing.
- Use the remote's auto-search. Most step through their whole code library for you — hold Setup, then tap CH+ (or Power) once per code until the TV reacts, then press Setup to lock it in. The tracker's Auto-search helper keeps the count so you don't lose your place.
- Power-cycle the TV. Unplug it for 30 seconds. If even the original Hisense remote stays dead afterwards, the problem is the TV, not the code.
Still nothing? The phone remote app skips codes entirely — it pairs over Wi-Fi and works on every Hisense smart TV from 2018 on.
How to tell if the remote is actually dead
Before you buy a replacement, find out whether the remote or the TV's sensor is at fault. Point your phone's camera at the front of the remote and press any button: a working IR remote shows a faint purple or white flash on the camera screen. No flash means the remote is dead — try fresh batteries, then replace it. A flash but no response means the TV's IR receiver (the small dark dot, usually on the bottom-center bezel) is blocked, dirty, or failing — wipe it clean and clear anything sitting in front of it.
How Hisense series differ (2018-2026)
The reason one Hisense needs a different code than another is the platform inside it, not the year on the box. Across 2018 to 2026 Hisense has shipped several smart-TV systems, and each uses its own remote protocol:
- VIDAA — Hisense's own OS, on most U-series and QLED sets. Standard IR, the codes universal remotes know best.
- Android TV / Google TV — many U6/U7/U8 and 2023-onward K-series. IR plus optional Bluetooth voice remotes.
- Roku TV — the R-series and Roku-badged H-series. Bluetooth pairing; ignores IR codes entirely.
So a code that runs a 2019 VIDAA set may do nothing on a 2022 Roku model even though both say "Hisense." Match the approach to the platform: VIDAA and Android/Google sets take codes, while Roku sets need a Roku remote or the Wi-Fi app.
Cheaper alternative: use your phone
The phone remote app is free, pairs in 30 seconds, has a real keyboard for typing in passwords, and supports every Hisense smart TV from 2018+. Not sure which to pick? Compare the Hisense TV remote app options. If you have a smartphone and your TV is on Wi-Fi, you don't need a universal remote at all.
FAQ
What is the 4-digit code for a Hisense TV?
There isn't one universal answer — it depends on your remote's brand, because Hisense has used several IR protocols since 2018. The tracker at the top of this page picks the right 4-digit codes for GE, RCA and other IR remotes, and steps you through them one at a time. Roku-only Hisense models don't accept any 4-digit code.
What is the 5-digit code for a Hisense TV?
Five-digit codes are what cable and satellite box remotes use — Comcast/Xfinity, Cox, Spectrum. As with 4-digit codes there's no single "Hisense" number; choose your remote in the tracker above and it lists the 5-digit codes to try in order.
What is the One For All code for a Hisense TV?
One For All uses 5-digit setup codes tied to the specific remote model, so there's no single "Hisense" number. Find your remote's URC model number (printed on the back — for example URC 7935) and look it up at websupport.uei.com. For the One For All Streamer Remote (URC 7935) the Hisense TV code is 43155. Some models — such as the Essence 3 (URC 7130) — don't list Hisense at all, in which case use a different universal remote or the free Wi-Fi phone app.
Can a Roku universal remote control a Hisense Roku TV?
Yes — Hisense Roku TVs accept Roku-branded universal remotes. Code-based pairing isn't necessary; Roku universals discover the TV over the network. The official Roku TV remote (Voice Remote Pro) also works on any Hisense Roku TV out of the box.
Why won't any universal remote code work on my Hisense?
Three causes: (1) it's a Hisense Roku TV that pairs over Bluetooth and accepts no IR codes — it needs a Roku remote; (2) the TV's IR receiver is dead — test it with the phone-camera trick above; (3) it's the wrong remote brand or a weak IR signal — fit fresh batteries and use the tracker to try the next brand's codes.
Is there a free alternative to a universal remote for Hisense?
Yes — the free iPhone Remote for Hisense TV app works with every modern Hisense smart TV without IR codes (it uses Wi-Fi). No remote brand selection, no programming codes, no $20 hardware purchase. Pairs in 30 seconds. Apple Watch support on Pro tier.
Will a Hisense remote work on a Hisense TV from a different year?
Usually yes — Hisense IR remotes are forward and backward compatible within ±3 years. A 2024 H8N remote will control a 2020 H8G TV and vice-versa. Exceptions: Roku-paired remotes (Bluetooth-only) only work on the TV they were originally paired to.
